MPO/MTP Modular Cassette Panel, Sliding Type, 96 Core 1U
Product Description:
Premium 19-inch 1U modular fiber panel for pre-terminated MPO/MTP backbone systems in data centers and enterprise networks. Interchangeable cassettes and adapter modules support MPO/MTP-to-LC breakout, direct MPO/MTP pass-through and migration architectures. Typical cassette-loaded density is 72 to 144 fibers; higher counts are available with direct MPO/MTP adapter modules subject to the selected architecture.
| Form Factor | 19-inch rack mount, 1U, high-density modular cassette chassis |
| Module Capacity | Up to 12 cassette/adapter positions, depending on selected module footprint |
| Fiber Capacity | 72F / 96F / 144F typical with LC breakout; >144F possible with direct MPO/MTP pass-through modules |
| Typical 72F Configuration | 6 × 12F MPO/MTP-to-LC cassettes = 72 fibers / 36 × LC Duplex |
| Typical 144F Configuration | 12 × 12F cassettes or 6 × 24F cassettes = 144 fibers / 72 × LC Duplex |
| Front Interface | LC Duplex breakout or MPO/MTP pass-through; LC/UPC or LC/APC as selected |
| Rear Interface | MPO/MTP trunk interface; MPO/MTP-8 / -12 / -16 / -24 options by system architecture |
| Polarity & Keying | TIA Method A / B / C; key orientation and pinning per approved system design |
| Fiber Compatibility | OS2 (G.657.A1 / G.652.D), OM3, OM4 and OM5 |
| Chassis Material | Cold-rolled steel, nominal ≥1.2 mm, precision formed |
| Finish | Black powder coating, RAL 9005 or equivalent |
| MPO/MTP Insertion Loss | Premium low-loss ≤0.35 dB max per mated pair, subject to qualified connector/BOM |
| MPO/MTP Return Loss | Single-mode APC ≥60 dB; multimode ≥20 dB, subject to qualified connector/BOM |
| LC Optical Performance | IL ≤0.25 dB max; SM UPC RL ≥50 dB; SM APC ≥60 dB; MM ≥20 dB |
| Connector Durability | ≥500 mating cycles for qualified LC and MPO/MTP interfaces |
| Environmental Range | -10°C to +60°C operating; -20°C to +70°C storage; 5–95% RH, non-condensing |
| Fiber / Cable Management | Protected routing, bend control, strain relief, tie-down points and rear/side cable entry |
| Nominal Dimensions | 19-inch × 1U (44.45 mm high); depth and module geometry per approved production drawing |
