Wall Mount Distribution Unit, Plastic 24 Port
Features:
- High-impact PC+ABS engineering-plastic housing with UV-resistant, flame-retardant grade material.
- 24 adapter positions with organized fusion-splice tray, pigtail routing and excess-fiber storage.
- Hinged, lockable cover with gasketed enclosure design; IP65 when installed with specified seals and cable glands.
- Separate routing paths for feeder cable, pigtails and patch cords to minimize fiber disturbance during service.
- Integrated cable anchoring, strain relief and protected routing with managed bend radius ≥40 mm.
• Wall-mount hardware standard; pole-mount kit and PLC splitter accommodation available as project options.
| Product Type | Wall Mount Fiber Distribution Box / Wall Mount ODF, plastic enclosure |
| Port / Fiber Capacity | 24 adapter positions; 24-fiber standard splice/termination capacity |
| Adapter Compatibility | SC Simplex or LC Duplex adapter format; UPC/APC as configured |
| Fiber Compatibility | OS2 (G.652.D / G.657.A1/A2) and OM3 / OM4 / OM5 |
| Housing Material | High-impact PC+ABS engineering plastic, UV-resistant, flame-retardant grade |
| Protection Rating | IP65 when correctly installed with specified seals/glands; indoor/outdoor capable |
| Splice Management | Integrated removable/hinged splice tray; heat-shrink splice sleeve compatible |
| Cable Entry / Exit | 2 feeder-cable entry positions plus configurable drop-cable outlets up to 24 |
| Fiber Management | Dedicated routing and storage zones; minimum managed bend radius ≥40 mm |
| Cover / Security | Hinged cover with lock/latch and perimeter sealing gasket |
| Operating Temperature | -40°C to +70°C |
| Relative Humidity | Up to 95% RH, non-condensing |
| Loaded Adapter Performance | Insertion loss ≤0.20 dB typical / ≤0.30 dB max; mating durability ≥500 cycles |
| Color | Light gray / RAL 7035 equivalent; other colors available by project |
